Logansport RC Raceway - Rules and Classes

Race Classes and Rules - Race director has final say on rules 

1/10th 2wd RTR Brushed SCT

Any electric 2wd Brushed SCT RTR (Slash,Blitz, Torment,SC10)

Truck must remain stock factory chassis,suspension,drive train ect

May run any radio or reciever.

Any SCT body is allowed but must remain intact during race. 

Stock Servo, Factory brushed esc , Factory brushed motor (sealed can rtr style motor, 12t limit)

6 or 7 cell NIMH up to 5000mah or 2 cell lipo 5400mah limit

Stock RTR Tires that for your brand of truck

Motors may not be direct soldered

1/10 OPEN  2wd/4x4 SCT

Any 2wd, 4x4 sct chassis

Any SCT body

Any Wheel/Tire

Any 1/10 Scale Brushless motor esc combo (no 1/8 Scale esc/motors)

RC Legends

1. The first rule is that if the rules do not specifically state that you can do something, YOU CANNOT DO IT.

2.  It is up to the track director on how to deal with anyone caught with an illegal or questionable car.

3.  This class will not tolerate cheating or bending the area of the rules in any way.

4.  Working in the grey area of any rule is frowned upon. Everyone is encouraged to follow the rules as they are presented.

5.  If it is your first week and you are unable to conform to the rules and would like to race, please let the track director know. Inform the track director that you will conform and be legal the next time you are at the track. This is a courtesy mulligan rule put in place for someone to be able to race one time. This rule will not apply during trophy races or special events. You must be 100% legal for trophy races and special events.

6.  Teching will be at the tack director’s discretion and at any time any racer’s car will be subject to inspection. If inspection is denied by the racer, this will be taken as an admission of an illegal car and the racer will be disqualified in the class for the night and subject to permanent suspension from the class. 

Car setup

Chassis: Stock RJ speed / Bolink Legends Chassis no modding or cutting allowed (except to install servo mounting posts)

Body: Only genuine RJ Speed R/C LEGENDS bodies are allowed as replacements

Bearings or Bushings are allowed

Motor: Tamiya Black Can Sport Tuned Motor

ESC: Any Brushed Non pc progamable ESC

Battery: 4 cell Nihm Battery upto 5000mah

Radio : Any Radio / Reciever / Servo

Tires: Legend Kit tires (yellow) or Purple Spec Tire

1.  Absolutely no changes to the configuration of the chassis or cutting on the chassis parts. No replacement parts of graphite or other higher tech materials. Lead or other ballast material to prevent rollover is not allowed.

2.  Any location of receiver and speed control on top of the battery plate is allowed. Steering servo may be mounted on the front axle plate, or on the long battery tray.

3.  No changes in the steering blocks or front axles. Different springs, shims or other pieces may be added to help the strength, stability, or ride height adjustments; but steering blocks and axles MUST be stock. May also add the front kingpin brace (RJS #5240) to help prevent front axle breakage in severe wrecks. You may put a washer behind the e-clip on the front axle to stop it from pulling thru the steering block.

4.  Original front steering rods may be replaced with any steering rods.

5.  The three piece front axle plate (RJS #5246) is allowed to facilitate quick repairs.

6.  Factory front bumper must remain on the car.

7.  Any bushings may be replaced with bearings.

8.  Only the stock steel rear axle and differential are allowed. Only the stock 48 pitch 81 tooth spur gear and 21 or 22 tooth pinion that came stock with the kit are allowed

VTA

http://www.usvintagetransam.com/rules/2010rules.pdf

1/10 Brushed Touring Car

Any 190/200mm 4wd Chassis (TT01, TC3, TC4 , Sprint..ect)

Any 24/26mm Touring Tire

Any 190/200mm Touring car body

Any brushed esc,

Tamiya Black Can Sport tuned motor

Any Radio/Reciever/Servo

6cell Nihm Battery up to 5000mah

Other Classes can be run as long as there are 3 or more similar cars to race.